A strong lake-irrigation pump needs to move water from the shoreline reliably, match the lift and hose setup, and deliver enough flow for your watering system. KITLUCK Water Transfer Garden Pump leads this lineup because its listed maximum suction lift is 26 feet and it includes a filter with a non-return valve connector. Other options range from Wayne’s stated 20-foot draw to self-priming models described for ponds, plus high-flow pumps whose listed data does not specify suction lift.
That distinction matters: published maximum head is not the same as the depth from which a pump can draw water. Compare the source-to-pump distance, voltage, connections, and intended use before choosing; lake water may also require inlet screening and routine debris checks.
KITLUCK Water Transfer Garden Pump is the leading choice for lake-fed irrigation in this group because its listed maximum suction lift is 26 feet, and the package includes a filter with a non-return valve connector. Those details speak directly to drawing water from a source rather than relying only on a high maximum-head figure. Check that the pump’s inlet connection and power supply suit your installation, and confirm that your required flow is compatible with its listed 1,000 GPH maximum.
Our Top Picks
Best OverallIts stated 26-foot maximum suction lift directly addresses drawing lake water, and the included filter with non-return valve connector supports an inlet setup.
View on Amazon
Best Self-PrimingThe self-priming design is explicitly described as drawing from ponds, tanks, or wells, making its stated source compatibility especially relevant to lake irrigation.
View on Amazon
Best Stated DrawWayne specifies that its 1 HP pump draws water up to 20 feet and has 1-inch NPT suction and discharge threads for sprinkler-system use.
View on Amazon- Highest Listed Flow AQUASTRONG SPRK150 Pump
- Best Tank Setup AQUASTRONG PGA150SA Pump
Compare pumps for lake-fed irrigation
| # | Product | Voltage | Material | Dimensions | Buy |
|---|---|---|---|---|---|
| 1 | 1. KITLUCK Water Transfer PumpBest Overall | 120 V | Aluminum, Stainless Steel | 13"L x 9"W x 9.8"H | View on Amazon |
| 2 | 2. czobloik GT15 PumpBest Self-Priming | — | — | — | View on Amazon |
| 3 | 3. Wayne PLS100 PumpBest Stated Draw | 120 V | Stainless Steel | 18"L x 11.5"W x 9.38"H | View on Amazon |
| 4 | 4. AQUASTRONG SPRK150 PumpHighest Listed Flow | 115 V | Cast Iron | 22.8"L x 11.8"W x 12.4"H | View on Amazon |
| 5 | 5. AQUASTRONG PGA150SA PumpBest Tank Setup | 115 V AC | Stainless Steel | 17.9"L x 10.9"W x 19.7"H | View on Amazon |
| 6 | 6. SHANGDA 3880GPH PumpHigh-flow shallow-well transfer | 110 V | Aluminum, Plastic, Stainless Steel | 15"L x 7.7"W x 11.8"H | View on Amazon |
| 7 | 7. SHANGDA 3800GPH PumpHigh-flow garden irrigation | 120 V AC | Aluminum, Plastic, Stainless Steel | 15"L x 7.7"W x 11.8"H | View on Amazon |
| 8 | 8. PANRANO 2TJ PumpHigh-lift portable garden watering | 110 V | Stainless Steel | 15"L x 7.7"W x 11.8"H | View on Amazon |
| 9 | 9. Holdwell S Pressure-Tank PumpAutomatic tank-based irrigation | — | — | — | View on Amazon |
| 10 | 10. Danner ProLine 02670 PumpLarge pond transfer applications | 120 V | Acrylonitrile Butadiene Styrene (ABS) | 15"L x 7.25"W x 7.25"H | View on Amazon |
Detailed Reviews: Best Water Pump For Irrigation From Lake

#1 · Best Overall
1. KITLUCK Water Transfer Pump
- Voltage: 120 V
- Material: Aluminum, Stainless Steel
- Dimensions: 13"L x 9"W x 9.8"H
Best for: Portable filtered water transfer.
Why it ranks #1: Its stated 26-foot maximum suction lift directly addresses drawing lake water, and the included filter with non-return valve connector supports an inlet setup.
A supplied filter with non-return valve connector makes the KITLUCK TLGP1201 a practical option for buyers who want that component included with a portable irrigation pump. It lists a 26-foot maximum suction lift, 1000 GPH flow, and 150-foot lift, useful figures for evaluating a lake-side setup.
The 26-foot maximum suction lift helps establish how high the pump may sit relative to its water source, while the listed 150-foot lift informs route planning. Its 1000 GPH maximum flow is a reference for matching output to a garden’s watering needs. The included filter with non-return valve connector and garden-hose adapters support source-side and hose setup. At 13 by 9 by 9.8 inches and 15 pounds, the pump is sized for portable handling.
- Includes filter with non-return valve connector
- Maximum suction lift listed at 26 feet
- Maximum lift specified at 150 feet
- Includes two garden hose adapters
- The stated maximum flow is 1000 GPH, limiting its listed throughput.
Skip it if you need the highest listed flow; SHANGDA model 001 specifies 3800 GPH for garden irrigation.
This KITLUCK suits gardeners seeking a portable pump with a supplied filter connector and defined suction limit. Its 1000 GPH rating makes it a more measured transfer choice, so compare that figure with your irrigation demand and route.
Full product details
| Brand | KITLUCK |
|---|---|
| Color | Red |
| Included Components | 1* 3/4′′ Filter with Non-return Valve Connector, 1* 3/4′′ Inlet Water Hose Adapter, 1* Water Transfer Garden Pump, 2* 3/4′′ NPT Garden Hose Adapter |
| Dimensions | 13"L x 9"W x 9.8"H |
| Item Weight | 15 pounds |
| Manufacturer | KITLUCK |
| Part Number | TLGP1201 |
| Material | Aluminum, Stainless Steel |
| Model Number | TLGP1201 |
| Product Style | 1.6HP |
| Style | 1.6HP |
| Voltage | 120 volts |
| Additional Information | Important Information Wattage 1200 watts Bulb Voltage 120 volts |
Why it ranks #2: The self-priming design is explicitly described as drawing from ponds, tanks, or wells, making its stated source compatibility especially relevant to lake irrigation.
Self-priming operation is the defining feature of czobloik’s GT15, allowing its centrifugal pump to draw from ponds, tanks, or wells without manual priming. That makes it a candidate for lake-fed irrigation, with a stated 1.5 HP, 230-volt motor and cast-iron protective casing shaping the installation decision.
The self-priming design and impeller are described as providing consistent flow for irrigation or water transfer without manual priming, simplifying repeated water-source use. Its listed applications include small farms, orchards, gardens, and livestock watering, making it relevant to varied property watering tasks. Standard inlet and outlet pipe connections are specified, but the available product information does not provide flow, lift, or connection dimensions. The 230-volt motor requires a matching electrical supply.
- Self-priming centrifugal design avoids manual priming
- Listed for drawing from ponds, tanks, or wells
- Impeller supports consistent irrigation or transfer flow
- Cast-iron protective casing
- The supplied specifications omit flow rate, lift, and connection dimensions.
Skip it if you need a stated flow or lift figure before planning; Wayne PLS100 lists 850 gallons per hour.
Choose this GT15 if your property has a suitable 230-volt supply and you value self-priming pond or tank transfer for irrigation. Its missing flow, lift, and connection measurements leave more system-planning questions to resolve.
Full product details
| Brand | czobloik |
|---|---|
| Color | Blue |
| Included Components | Pump |
| Manufacturer | czobloik |
| Part Number | YCB-GT15 |
| Model Number | GT15 |
| Product Style | Above Ground |
| Style | Above Ground |
Listed on Amazon as: Fit for GT15 Self-Priming Centrifugal Pump,1.5HP Motor/230 Volts
View on Amazon
#3 · Best Stated Draw
3. Wayne PLS100 Pump
- Voltage: 120 V
- Material: Stainless Steel
- Dimensions: 18"L x 11.5"W x 9.38"H
Best for: Portable sprinkler-system setup.
Why it ranks #3: Wayne specifies that its 1 HP pump draws water up to 20 feet and has 1-inch NPT suction and discharge threads for sprinkler-system use.
A fan-cooled, continuous-duty 1 HP motor gives the Wayne PLS100 a clear role in moving water to a lawn sprinkler system. Its stainless-steel exterior and carry handle suit seasonal outdoor use, while the pump’s stated 20-foot draw is a key limit to consider when positioning it near a lake.
The 120-volt motor is specified for continuous duty, supporting extended sprinkler operation rather than only brief transfers. A 20-foot water draw helps define how far the pump can sit above its source, so measure the lake-to-pump elevation before choosing a location. The 1-inch NPT suction and discharge threads provide a clear connection standard for setup. Stainless-steel construction, an on/off switch, and a carry handle support outdoor handling and relocation between watering jobs.
- Fan-cooled 1 HP motor is rated for continuous duty
- Draws water up to 20 feet
- Stainless-steel exterior is corrosion-resistant
- Carry handle and on/off switch support handling
- The specified draw limit is 20 feet, constraining source-to-pump elevation.
Skip it if you need more than a 20-foot draw; PANRANO 2TJ lists a 145-foot maximum lift.
This Wayne fits gardeners connecting a nearby water source to sprinkler equipment for ongoing lawn watering. Keep its 20-foot draw and 1-inch NPT connections in view when planning lake-side placement and hose or pipe runs.
Full product details
| Brand | Wayne |
|---|---|
| Color | Stainless Steel |
| Included Components | Pump |
| Dimensions | 18"L x 11.5"W x 9.38"H |
| Item Weight | 20.6 pounds |
| Manufacturer | Wayne Water Systems |
| Part Number | PLS100 |
| Manufacturer Warranty Description | 1 Year |
| Material | Stainless Steel |
| Model Number | PLS100 |
| Product Style | 1HP |
| Style | 1HP |
| Voltage | 120 volts |
| Additional Information | Important information Indications See owners manual Directions See owners manual |
Listed on Amazon as: WAYNE PLS100-1 HP Portable Stainless Steel Lawn Sprinkling Water Pump – Up to 850 Gallons Per Hour – Heavy Duty Outdoor Pump for Sprinkler Systems
View on Amazon
#4 · Highest Listed Flow
4. AQUASTRONG SPRK150 Pump
- Voltage: 115 V
- Material: Cast Iron
- Dimensions: 22.8"L x 11.8"W x 12.4"H
Best for: Large-pipe sprinkler systems.
Why it ranks #4: The 1.5 HP cast-iron pump lists 4,250 GPH and a 2-inch NPT suction, useful for systems needing substantial flow and a larger inlet.
A 2-inch NPT suction and 11⁄2-inch NPT discharge set the AQUASTRONG SPRK150 apart for irrigation layouts using larger pipe connections. Its listed 4250 GPH maximum flow and 108-foot maximum head suit substantial transfer planning, while its cast-iron body and 115/230-volt title specification are notable installation considerations.
The stated 4250 GPH maximum flow and 108-foot maximum head give buyers figures for estimating delivery needs and route elevation. A reinforced impeller and diffuser are described as supporting efficiency and water flow, connecting the pump’s internal design to its irrigation role. The 2-inch suction and 11⁄2-inch discharge NPT ports make pipe sizing central to setup. Its cast-iron construction and 22.8-inch length also matter when selecting a stable, accessible installation location.
- Maximum flow listed at 4250 GPH
- Maximum head listed at 108 feet
- 2-inch NPT suction and 11⁄2-inch NPT discharge
- Reinforced impeller and diffuser
- The 108-foot maximum head is lower than SHANGDA model 001’s listed 164 feet.
Skip it if you need the higher listed maximum lift; SHANGDA model 001 specifies 164 feet versus this pump’s 108-foot maximum head.
The SPRK150 suits irrigation setups already planned around its larger NPT ports and substantial stated flow. Confirm that your pipe layout, available supply voltage, and route head align with its specifications before positioning it for lake-water transfer.
Full product details
| Brand | AQUASTRONG |
|---|---|
| Color | Black |
| Included Components | Centrifugal Pump |
| Dimensions | 22.8"L x 11.8"W x 12.4"H |
| Manufacturer | AQUASTRONG |
| Material | Cast Iron |
| Model Number | SPRK150 |
| Product Style | 1.5 HP 115/230V |
| Style | 1.5 HP 115/230V |
| Voltage | 115 volts |
| Additional Information | Important Information Bulb Voltage 115 volts |
Listed on Amazon as: AQUASTRONG 1.5 HP Shallow Well Jet/Centrifugal Pump, 4250 GPH, 115/230V, Durable Cast Iron Booster Pump for Lawn Sprinkler, Garden Irrigation
View on Amazon
#5 · Best Tank Setup
5. AQUASTRONG PGA150SA Pump
- Voltage: 115 V AC
- Material: Stainless Steel
- Dimensions: 17.9"L x 10.9"W x 19.7"H
Best for: Automatic pressure-tank irrigation.
Why it ranks #5: Its pressure switch and compact 5-gallon tank support automatic pressure operation; the listed maximum suction is 26 feet and flow is 1,340 GPH.
A pressure switch that starts at 20 psi and stops at 40 psi gives the AQUASTRONG PGA150SA a clearly specified automatic operating cycle. Its five-gallon pressure tank, stainless-steel housing, and 26-foot suction limit make it a home and garden irrigation option with concrete setup parameters.
The stated 20 psi start and 40 psi stop thresholds explain how the pressure switch controls operation, useful for buyers planning a domestic water or garden system. A five-gallon pressure tank pairs with that switch for pressure-based use. The 1.6 HP motor lists up to 1340 GPH flow, a maximum head of 164 feet, and suction up to 26 feet, giving several route-planning figures. Stainless-steel housing is specified as corrosion-resistant.
- Pressure switch starts at 20 psi and stops at 40 psi
- Five-gallon pressure tank included
- Maximum suction lift listed at 26 feet
- Stainless-steel housing specified as corrosion-resistant
- Maximum flow is listed at 1340 GPH, below SHANGDA model 001’s 3800 GPH.
Skip it if you need higher listed flow; SHANGDA model 001 specifies 3800 GPH, compared with this pump’s 1340 GPH maximum.
This AQUASTRONG fits home gardeners who want pressure-tank operation with stated switch thresholds and suction distance. Its 1340 GPH maximum flow is an important boundary when matching the pump to larger irrigation demands.
Full product details
| Brand | AQUASTRONG |
|---|---|
| Color | Black |
| Included Components | well pump |
| Dimensions | 17.9"L x 10.9"W x 19.7"H |
| Manufacturer | AQUASTRONG |
| Part Number | PGA150SA |
| Material | Stainless Steel |
| Model Number | PGA150SA |
| Product Style | 1.6 HP with Pressure Tank |
| Style | 1.6 HP with Pressure Tank |
| Voltage | 115 volts_of_alternating_current |
| Additional Information | Important Information Bulb Voltage 115 volts_of_alternating_current |
Listed on Amazon as: Aquastrong 115V Shallow Well Garden Pump, Stainless Steel, 1320 GPH, Automatic Water Booster Jet Pump for Home, Garden, Lawn,Irrigation,1.6 HP with Pressure Tank
View on Amazon
#6
6. SHANGDA 3880GPH Pump
- Voltage: 110 V
- Material: Aluminum, Plastic, Stainless Steel
- Dimensions: 15"L x 7.7"W x 11.8"H
Best for: High-flow shallow-well transfer.
Why it ranks #6: Its listed 3,880 GPH flow and 164-foot maximum lift offer substantial transfer capacity, though the supplied specifications do not state suction lift.
SHANGDA lists 3880 GPH for this 1.6 HP shallow-well pump, making high-volume garden irrigation its clearest use case. The 164-foot maximum lift, waterproof switch, and included hose adapters give buyers useful route-planning and setup details for transferring water from a lake to a lawn.
The 3880 GPH maximum flow can help buyers compare the pump with irrigation demand, while its 164-foot maximum lift provides a reference for elevation planning. Three hose adapters, Teflon tape, and a hose clamp are included to assist initial connections. The waterproof on/off switch is specified for safe, easy operation, and rear cooling vents help dissipate heat. Its 110-volt listing and 15-by-7.7-by-11.8-inch dimensions are relevant when choosing an electrical supply and installation location.
- Listed 3880 GPH maximum flow
- Maximum lift specified at 164 feet
- Includes three hose adapters, Teflon tape, and hose clamp
- Waterproof switch and rear cooling vents
- The supplied details do not state a maximum suction-lift distance.
Skip it if you need a listed maximum suction distance; KITLUCK TLGP1201 specifies a 26-foot maximum suction lift.
This SHANGDA suits gardeners prioritizing high stated flow for lake-fed irrigation and who can plan around a 110-volt supply. Because no suction-lift figure is provided, source-to-pump placement deserves particular attention.
Full product details
| Brand | SHANGDA |
|---|---|
| Color | Light Yellow |
| Included Components | 1*Manual, 3*Hose Adapters, 1*Teflon Tape,1*Hose Clamp |
| Dimensions | 15"L x 7.7"W x 11.8"H |
| Manufacturer | SHANGDA |
| Material | Aluminum, Plastic, Stainless Steel |
| Model Number | 2TJ |
| Product Style | Shallow Well Pump |
| Style | Shallow Well Pump |
| Voltage | 110 volts |
| Additional Information | Important Information Bulb Voltage 110 volts |
Listed on Amazon as: Water Transfer Garden Pump 1.6HP 3880GPH Shallow Well Pump, Electric Sprinkler Pressure Booster Pump for Pool Draining, Lawn Irrigation, Water Removal
View on Amazon
#7
7. SHANGDA 3800GPH Pump
- Voltage: 120 V AC
- Material: Aluminum, Plastic, Stainless Steel
- Dimensions: 15"L x 7.7"W x 11.8"H
Best for: High-flow garden irrigation.
Why it ranks #7: The 1.6 HP model lists 3,800 GPH and 164 feet maximum lift, but no suction-lift figure is provided for judging lake-source placement.
SHANGDA’s stated 3800 GPH flow is the headline figure for this 1.6 HP shallow-well transfer pump, aimed at moving substantial water for garden irrigation. Its listed 164-foot maximum lift and included hose adapters add planning information and connection supplies, while the 120-volt specification guides electrical setup.
The 3800 GPH maximum flow provides a reference for estimating irrigation demand, and the 164-foot maximum lift helps assess elevation along a route from a lake. Three hose adapters, Teflon tape, and a hose clamp are included to support initial connection work. A waterproof on/off switch is specified for operation, and rear cooling vents help dissipate heat. The product lists aluminum, plastic, and stainless steel materials, with a compact 15-by-7.7-by-11.8-inch form.
- Listed 3800 GPH maximum flow
- Maximum lift specified at 164 feet
- Includes three hose adapters, Teflon tape, and hose clamp
- Waterproof switch and rear cooling vents
- Its maximum flow is specified, but no suction-lift figure is supplied.
Skip it if you need a published suction-lift limit; KITLUCK TLGP1201 specifies a 26-foot maximum suction lift.
This SHANGDA fits gardeners prioritizing the listed high flow and 164-foot maximum lift for an irrigation route. Check source elevation, suction requirements, and the 120-volt supply as part of choosing a lake-side installation.
Full product details
| Brand | SHANGDA |
|---|---|
| Color | Yellow |
| Included Components | 1*Manual, 3*Hose Adapters, 1*Teflon Tape,1*Hose Clamp |
| Dimensions | 15"L x 7.7"W x 11.8"H |
| Manufacturer | SHANGDA |
| Material | Aluminum, Plastic, Stainless Steel |
| Model Number | 001 |
| Product Style | Above Ground |
| Style | Above Ground |
| Voltage | 120 volts_of_alternating_current |
| Additional Information | Important Information Bulb Voltage 120 volts_of_alternating_current |
Listed on Amazon as: Water Transfer Pump Electric Shallow Well Pump 1.6HP 3800GPH for Lawn Garden Irrigation, Yellow
View on Amazon
#8
8. PANRANO 2TJ Pump
- Voltage: 110 V
- Material: Stainless Steel
- Dimensions: 15"L x 7.7"W x 11.8"H
Best for: High-lift portable garden watering.
Why it ranks #8: This 1.5 HP pump lists 1,600 GPH and a 145-foot maximum lift, plus three hose adapters, but its supplied data omits suction lift.
A stated 145-foot maximum lift gives the PANRANO 2TJ a useful specification for planning water transfer across elevation changes. Its 1.5 HP motor is rated at 1600 gallons per hour, while the waterproof switch and rear cooling vents address everyday operation during garden irrigation or lake-water transfer.
The 1600 GPH flow and 145-foot maximum lift offer two planning figures for matching the pump to a watering route and elevation; actual suitability depends on the full installation. The 110-volt listing identifies the electrical supply requirement. Three hose adapters, Teflon tape, and a hose clamp are included, helping prepare for hose connections, while the waterproof on/off switch supports convenient operation and rear cooling vents dissipate motor heat during use.
- 1.5 HP motor with stated 1600 GPH flow
- Maximum lift listed at 145 feet
- Waterproof on/off switch
- Includes three hose adapters, Teflon tape, and hose clamp
- The stated maximum flow is 1600 GPH, below SHANGDA model 001’s 3800 GPH.
Skip it if you need the listed 3800 GPH flow; SHANGDA model 001 specifies that higher maximum flow.
This PANRANO suits gardeners needing a portable 110-volt pump with a published lift figure for irrigation routing. Check that 1600 GPH and your hose connections suit the intended lake-to-garden system before settling on placement.
Full product details
| Brand | PANRANO |
|---|---|
| Color | Pale Blue |
| Included Components | 1*Manual, 3*Hose Adapters, 1*Teflon Tape,1*Hose Clamp |
| Dimensions | 15"L x 7.7"W x 11.8"H |
| Item Weight | 16 pounds |
| Manufacturer | PANRANO |
| Part Number | JGP1200-2TJ |
| Material | Stainless Steel |
| Model Number | 2TJ |
| Product Style | 1.5HP 1600GPH |
| Style | 1.5HP 1600GPH |
| Voltage | 110 volts |
| Additional Information | Important Information Bulb Voltage 110 volts |
Listed on Amazon as: Water Transfer Pump 110V Shallow Well Pump 1.5HP 1600GPH Electric Portable Garden Pressure Booster Pumps for Pool Draining Farm Irrigation Lake Lawn Sprinkler System
View on AmazonWhy it ranks #9: The 1.5 HP model includes a 5-gallon pressure tank and lists 1,320 GPH, but the supplied specifications give no suction-lift details for lake pickup.
A five-gallon pressure tank paired with a pressure switch is the defining setup of the HoldwellS shallow-well jet pump. The title also lists 1320 GPH, stainless steel, and a 164-foot maximum head, making it a candidate for home irrigation where automatic booster operation matters.
The five-gallon tank and pressure switch distinguish this unit from a pump listing without a tank; the title identifies it as an automatic water booster. That combination may suit a home irrigation system where pressure-based operation is desired, though detailed switch thresholds are not supplied. The listed 1320 GPH and 164-foot maximum head provide starting points for flow and elevation planning. Included inlet and outlet connectors support connection work, but their dimensions are not specified.
- Five-gallon pressure tank included
- Pressure switch specified for automatic booster operation
- Title lists 1320 GPH flow
- Maximum head listed at 164 feet
- The supplied details do not specify pressure-switch start and stop settings.
Skip it if you need published switch thresholds; AQUASTRONG PGA150SA lists automatic operation starting at 20 psi and stopping at 40 psi.
This HoldwellS fits home irrigation buyers seeking a pressure-tank system and listed automatic booster operation. Its 1320 GPH rating and unspecified switch settings mean careful matching to your watering demand and pressure requirements is important.
Full product details
| Brand | Holdwell S |
|---|---|
| Included Components | Shallow Well Jet Pump, User Manual, Water Inlet Connector, Water Outlet Connector |
| Manufacturer | HoldwellS |
| Model Number | JP00000140-AZCN9901 |
| Product Style | Shallow Well |
| Style | Shallow Well |

#10
10. Danner ProLine 02670 Pump
- Voltage: 120 V
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Dimensions: 15"L x 7.25"W x 7.25"H
Best for: Large pond transfer applications.
Why it ranks #10: Its 4,800 GPH capacity and protective cage suit larger pond installations, but the listed purpose and fittings do not establish suitability for irrigation lift or pressure.
A protective cage with a built-in carry handle gives Danner’s ProLine 02670 a distinct format for high-capacity pond installations. Its 4800 GPH rating and 120-volt supply make it relevant to large water-transfer tasks, while the included barbed fittings and coupling shape the connection plan.
Danner describes the Hy-Drive design as combining magnetic and direct-drive technologies for quiet, low-maintenance operation, qualities relevant when a pump runs near a pond or garden. The protective polypropylene cage includes a carry handle and molded-in debris protection, supporting handling and shielding around the pump. Its 4800 GPH rating indicates high capacity, and two 11⁄2-inch barbed fittings plus a coupling are included. The product is specified for larger pond installations, rather than as a shallow-well jet pump.
- 4800 GPH stated capacity
- Protective polypropylene cage with carry handle
- Hy-Drive combines magnetic and direct-drive technologies
- Includes two 11⁄2-inch barbed fittings and a coupling
- It is specified for larger pond installations, not as a shallow-well jet pump.
Skip it if you need a shallow-well jet pump with a stated suction lift; KITLUCK TLGP1201 lists a 26-foot maximum.
This Danner suits buyers handling larger pond installations who value a protective cage, included fittings, and the listed high capacity. Its pond-pump format is a boundary to weigh when planning a lake-fed shallow-well irrigation system.
Full product details
| Brand | Danner |
|---|---|
| Color | Black |
| Included Components | 4800 GPH Pump, Included Fittings: (2) 1 1/2" Barb & (1) Coupling, Instruction Sheet |
| Dimensions | 15"L x 7.25"W x 7.25"H |
| Item Weight | 15 pounds |
| Manufacturer | Danner Manufacturing, Inc. |
| Part Number | 2670 |
| Manufacturer Warranty Description | 1 Year Warranty |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Model Number | 02670 |
| Product Style | Protective |
| Style | Protective |
| Voltage | 120 volts |
| Additional Information | Important Information This toy is a small ball. Not for children under 3 yrs. |
Listed on Amazon as: Danner Manufacturing, Inc., ProLine 4800 GPH Hy-Drive Water Pump with Protective Cage, 02670
View on AmazonThe lake-pickup failure a head rating can hide
A high maximum-head number does not tell you how far below or away from the pump the lake surface can be. For example, the SHANGDA 3880GPH Pump lists a 164-foot maximum lift, while its supplied data does not give a suction-lift figure; KITLUCK Water Transfer Pump explicitly lists a 26-foot maximum suction lift. Those measurements describe different constraints, so do not treat them as interchangeable.
If the pump cannot establish or maintain suction at your actual inlet height and line layout, a large head rating will not resolve that mismatch. Self-priming is another useful detail: czobloik GT15 Pump is described as drawing from ponds, tanks, or wells without manual priming, but its listing does not provide a suction-depth value.
Confirm the pump’s required priming procedure and suction limit in its manual before installation, and keep the inlet airtight.
Lake water and inlet protection are a separate decision
Lake water makes inlet protection and maintenance part of pump selection, not an afterthought. KITLUCK Water Transfer Pump includes a filter with a non-return valve connector, while PANRANO 2TJ Pump and both SHANGDA models list hose adapters, Teflon tape, and a hose clamp but do not list an inlet filter in the supplied components. Danner ProLine 02670 Pump has a protective cage and molded-in debris features, but it is described for pond installations rather than as a lake-irrigation pressure pump.
A pump’s included strainer or cage may not match the debris in your water or the irrigation emitters you intend to use. Check the manual for permitted screen size and maintenance instructions, and make sure a screen does not unduly restrict the inlet.
Avoid assuming that protective packaging or a high flow rating means the pump tolerates leaves, sand, or other debris.
How to Choose a Lake-Irrigation Pump
Suction lift and priming
Look first for a stated suction limit and priming method, because these determine whether a pump can draw from your lake at its planned location. KITLUCK Water Transfer Pump lists a 26-foot maximum suction lift; Wayne PLS100 Pump says it draws water up to 20 feet. czobloik GT15 Pump is self-priming and described for ponds, but no suction depth is supplied.
Several other models list maximum head figures instead, which are not a substitute for suction lift. A pump close to the water with a short, simple inlet may suit a model with less documented draw; a higher or more distant installation should favour a clearly stated suction limit and verified installation guidance.
Flow, head, and irrigation demand
Choose a pump whose flow and head figures fit the irrigation layout rather than selecting by horsepower alone. Listed maximum flows range from 1,000 GPH for KITLUCK Water Transfer Pump to 4,250 GPH for AQUASTRONG SPRK150 Pump; SHANGDA 3880GPH Pump lists 3,880 GPH, and Wayne PLS100 Pump lists up to 850 GPH. Some models also list maximum head, such as 164 feet for the SHANGDA pumps, but the supplied data does not explain flow at that head.
Smaller garden or limited-zone setups may prefer a more modest listed flow; larger demand may favour the high-flow options, after checking operating curves and the irrigation system’s pressure needs.
Power, inlet size, and installation
Match the pump’s power supply and connections to the site before buying. Listed voltage includes 110 or 115 volts, 120 volts, and 230 volts for czobloik GT15 Pump; AQUASTRONG SPRK150 Pump is listed as 115/230V in its title. Inlet fittings also vary: Wayne PLS100 Pump lists 1-inch NPT suction, while AQUASTRONG SPRK150 Pump lists a 2-inch NPT suction and 11⁄2-inch discharge.
KITLUCK Water Transfer Pump includes garden-hose adapters and lists 1-inch and 3⁄4-inch NPT connections. A nearby household outlet and smaller hose setup may favour a 110–120-volt option with compatible adapters; larger plumbing or a 230-volt installation requires checking the site’s wiring and pipe compatibility.
Which pump suits my lake-irrigation setup?
For a lake pickup where suction depth is a key concern, choose KITLUCK Water Transfer Pump: it lists a 26-foot maximum suction lift and includes a filter with a non-return valve connector. If you prefer a self-priming design explicitly described for ponds, czobloik GT15 Pump is a relevant alternative, though its supplied specifications do not state suction depth. For a sprinkler-oriented pump with a stated draw distance, Wayne PLS100 Pump lists up to 20 feet and 850 GPH.
If your system needs higher listed flow and larger inlet plumbing, consider AQUASTRONG SPRK150 Pump at 4,250 GPH with 2-inch NPT suction, but verify suction capability separately. Treat SHANGDA’s high head claims as transfer data, not proof of lake-side suction suitability; check each manual and match the pump to your elevation, piping, power, and irrigation demand.
Related Buying Guides
Frequently Asked Questions
How far above the lake can an irrigation pump sit and still draw water?
Use the pump’s stated maximum suction lift as a starting point, not a guarantee for your installation. Elevation, hose length, fittings, leaks, and priming can affect actual draw. KITLUCK lists a 26-foot maximum suction lift; confirm the manual’s conditions and allow margin rather than positioning the pump at the limit.
What inlet screen or filter should I use with lake water?
Use an intake screen or filter suited to the pump and the debris in your lake, and keep it clear of mud, weeds, and the lake bottom. A blocked or submerged-in-sediment intake can restrict flow. KITLUCK’s package includes a filter with a non-return valve connector; check its manual for installation and cleaning guidance.
How do I match a pump’s flow to my irrigation zones and hose size?
Compare the pump’s listed flow with the water demand of the zone you will run, then verify the required pressure and compatible inlet and outlet connections. Flow can vary with lift and piping, so a maximum-flow figure is not a guaranteed operating rate. Check the pump manual and irrigation equipment requirements before connecting.
Which listed pumps state a suction distance for lake pickup?
KITLUCK lists a maximum suction lift of 26 feet, while Wayne PLS100 lists a draw distance of up to 20 feet. These figures make them easier to evaluate for lake-side placement, but actual performance depends on installation conditions. The listed specifications for the other highlighted alternatives do not state suction depth.
What should I verify before installing a pump beside a lake?
Check that the pump’s power supply and inlet connection suit your installation, and confirm its suction capability, required flow, and pressure for your irrigation setup. Consider the elevation and piping between the lake and pump. Review the manual for priming and intake guidance; do not treat a high maximum-head figure as proof of suction suitability.
Final Words
For a lake pickup where suction depth matters, KITLUCK is the leading choice here: it lists a 26-foot maximum suction lift and includes a filter with a non-return valve connector. Consider Wayne PLS100 if its stated draw distance and sprinkler focus suit your setup, or AQUASTRONG SPRK150 for its higher listed flow and 2-inch suction connection. Before choosing, verify suction capability, power, connections, and zone demand.

