A strong concrete stud anchor needs to match the drilled hole, fixture, and concrete conditions; the right choice suits both the load and the environment. For solid concrete, CONFAST’s 1/2-inch by 5-1/2-inch zinc-plated wedge anchor is a useful starting point, with a nut and washer included in each of its 25 anchors. The products here range from compact 1/4-inch stud anchors to 3/4-inch wedges, plus stainless-steel options and concrete screw anchors.
That variety matters: these fasteners do not all install or work in the same base materials. Use the comparison to identify the anchor type, diameter, length, and material that fit your project, then verify embedment and installation requirements before drilling.
The listed specifications help narrow the choice, but they do not establish load capacity for a particular installation.
The CONFAST 1/2-inch x 5-1/2-inch wedge anchor is the best overall fit for many solid-concrete fastening jobs. It is explicitly intended for concrete, comes with a nut and washer, and is supplied in a box of Its zinc-plated carbon-steel construction is specified for dry environments, so it is not the best choice for wet or marine exposure.
Match the drill bit to the anchor diameter, and check the required embedment and load rating for your actual application before installation.
Our Top Picks
Best OverallIts 1/2-inch by 5-1/2-inch zinc-plated wedge design is specified for solid concrete, and each of 25 anchors includes a nut and washer.
View on Amazon
Long Stud OptionHard-to-Find 1/2-Inch Stud Anchor
This concrete stud anchor measures 1/2 inch by 3-3/4 inches, offering a large-diameter option for projects needing a shorter anchor than CONFAST.
View on Amazon
Largest DiameterHillman Zinc Steel Wedge Anchor
Its 3/4-inch by 5-1/2-inch wedge anchor is designed for solid concrete, with a torque-controlled expansion mechanism and a 10-piece pack.
View on Amazon- Compact Stud Anchor Hard-to-Find 1/4-Inch Stud Anchor
- Marine-Ready Material Levanco 304 Stainless Wedge Anchor
Compare Anchor Types and Fit for Your Project
| # | Product | Material | Compatible Groove Diameter | Thread Size | Size Name | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. CONFAST Wedge AnchorBest Overall | Carbon Steel | 0.5 in | 0.5 in | 1/2" x 5-1/2" | View on Amazon |
| 2 | 2. Hard-to-Find 1/2-Inch Stud AnchorLong Stud Option | Steel | — | — | — | View on Amazon |
| 3 | 3. Hillman Zinc Steel Wedge AnchorLargest Diameter | Steel | 0.75 in | 1/2" | 3/4" x 5-1/2" | View on Amazon |
| 4 | 4. Hard-to-Find 1/4-Inch Stud AnchorCompact Stud Anchor | Steel | 0.25 in | 1/4" | 1/4 x 3 | View on Amazon |
| 5 | 5. Levanco 304 Stainless Wedge AnchorMarine-Ready Material | Stainless Steel 304 | 3/8 in | 3/8 | 3/8" X 3" | View on Amazon |
| 6 | 6. YUEARN 304 Stainless Wedge AnchorStainless wedge anchor projects | Stainless Steel | 0.38 in | 3/8 | 3/8 in | View on Amazon |
| 7 | 7. Ahniiqo Galvanized Wedge AnchorSmall galvanized anchor projects | — | 0.31 in | 5/16 x 2In | 5/16 x 2In | View on Amazon |
| 8 | 8. Simpson Strong-Tie Titen HDHeavy-duty cracked-concrete fastening | Carbon Steel | 0.5 in | 3/8-inch | 6 in | View on Amazon |
| 9 | 9. Wensilon Large Diameter Screw AnchorLarge-diameter masonry screw installs | Alloy Steel, Carbon Steel, Zinc | 0.38 in | 3/8 inch | 3/8" x 3" | View on Amazon |
| 10 | 10. Wensilon Hex Concrete ScrewHigh-volume masonry screw work | Carbon Steel | 0.19 in | 0.2 in | 3/16" * 1-1/4" | View on Amazon |
Detailed Reviews: Best Stud Anchor For Concrete

#1 · Best Overall
1. CONFAST Wedge Anchor
- Material: Carbon Steel
- Compatible Groove Diameter: 0.5 in
- Thread Size: 0.5 in
- Size Name: 1/2" x 5-1/2"
Best for: Dry solid-concrete fastening.
Why it ranks #1: Its 1/2-inch by 5-1/2-inch zinc-plated wedge design is specified for solid concrete, and each of 25 anchors includes a nut and washer.
A 1/2-inch diameter and 5-1/2-inch length make this CONFAST wedge anchor a substantial option for dry, solid-concrete installations. Each anchor includes its nut and washer, giving the installer the listed hardware needed for assembly, while the 25-piece box supports projects with multiple attachment points.
CONFAST specifies this zinc-plated carbon-steel anchor for dry environments and concrete only, explicitly excluding brick, block, and grout. That boundary helps buyers avoid using it in unsuitable base materials. The anchor diameter is 1/2 inch, and the installation guidance calls for a bit of the same diameter plus a hole at least 1/2 inch deeper than the embedment. Included nuts and washers complete the listed installation hardware, while protecting the threads with the nut during installation is also recommended.
- 1/2-inch diameter and 5-1/2-inch length
- Nut and washer included with each anchor
- 25-piece box for multi-point projects
- Specified for dry solid-concrete applications
- Its stated use is limited to dry concrete, not brick, block, or grout.
Skip it if you need an anchor specified for saltwater or humid conditions; Levanco’s 304 stainless 3/8-inch by 3-inch wedge anchor is listed for those environments.
Choose CONFAST for multi-point fastening into solid concrete in a dry environment, with nuts and washers included. Its 1/2-inch size requires a matching bit, and the product’s stated material boundary rules out brick, block, and grout.
Full product details
| Brand | CONFAST |
|---|---|
| Color | Silver |
| Compatible Groove Diameter | 0.5 inches |
| Item Dimensions | 5.5 x 0.5 x 5.5 inches |
| Dimensions | 5.5 x 0.5 x 5.5 inches |
| Manufacturer | CONFAST |
| Material | Carbon Steel |
| Model | WA12512 |
| Screw Head Style | Flat |
| Size | 1/2" x 5-1/2" |
| Size Name | 1/2" x 5-1/2" |
| Thread Size | 0.5 inches |
Listed on Amazon as: 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of 25)
View on Amazon
#2 · Long Stud Option
2. Hard-to-Find 1/2-Inch Stud Anchor
- Material: Steel
Best for: Large-diameter concrete stud anchors.
Why it ranks #2: This concrete stud anchor measures 1/2 inch by 3-3/4 inches, offering a large-diameter option for projects needing a shorter anchor than CONFAST.
The 1/2-inch diameter and 3-3/4-inch length give this Hard-to-Find Fastener stud anchor a larger format than the brand’s 1/4-inch model. It is steel with a zinc finish, and the specified 1/2-inch drill size offers a clear hole-preparation reference for concrete fastening work.
For projects calling for a 1/2-inch anchor, this model provides a 3-3/4-inch length and a matching 1/2-inch drill specification. Those dimensions help identify the required bit and distinguish it from smaller stud anchors. The steel construction has a zinc finish; the supplied product description says the brand’s usual light zinc plating makes steel more rust resistant. However, no specific marine, saltwater, or wet-environment rating is given, so buyers should base exposure suitability on the listed finish rather than assume stainless performance.
- 1/2-inch diameter
- 3-3/4-inch length
- Specified 1/2-inch drill size
- Steel construction with zinc finish
- The zinc-finished steel has no listed marine or saltwater suitability.
Skip it if you need a stainless option for saltwater exposure; YUEARN’s 3/8-inch by 3-inch 304 stainless wedge anchors are made from 304 stainless steel.
This model suits buyers who need a 1/2-inch concrete stud anchor with a 3-3/4-inch length and matching drill specification. Its zinc-finished steel is the material boundary to weigh for installations exposed to persistent moisture.
Full product details
| Brand | Hard-to-Find Fastener |
|---|---|
| Item Weight | 13.1 ounces |
| Item model number | 014973237202 |
| Manufacturer | Hard-to-Find Fastener |
| Material | Steel |
| Size | 1/2 x 3-3/4 |
Listed on Amazon as: Hard-to-Find Fastener 014973237202 Concrete Stud Anchors, 1/2 x 3-3/4, Piece-4
View on Amazon
#3 · Largest Diameter
3. Hillman Zinc Steel Wedge Anchor
- Material: Steel
- Compatible Groove Diameter: 0.75 in
- Thread Size: 1/2"
- Size Name: 3/4" x 5-1/2"
Best for: Heavy fixture concrete anchoring.
Why it ranks #3: Its 3/4-inch by 5-1/2-inch wedge anchor is designed for solid concrete, with a torque-controlled expansion mechanism and a 10-piece pack.
A 3/4-inch diameter and 5-1/2-inch length make the Hillman wedge anchor a large-format choice for fastening fixtures to solid concrete. Its torque-controlled expansion design tightens the wedge against the hole walls as the nut is tightened, creating the listed load-bearing grip for permanent installation.
Hillman describes a drill, insert, and tighten workflow: after drilling the concrete, insert the anchor and tighten the nut to draw the wedge outward against the hole. That expansion mechanism grips more tightly as the nut is tightened. The fully threaded body measures 3/4 inch by 5-1/2 inches, providing a large anchor format for fixtures and materials. The product description limits this wedge anchor to solid concrete and says not to use it in block or brick.
- Torque-controlled expansion grips the hole walls
- Fully threaded 3/4-inch by 5-1/2-inch body
- Listed for fastening fixtures and materials to concrete
- Drill, insert, and tighten installation sequence
- Specified for concrete only; the description excludes block and brick.
Skip it if you are fastening into brick or block; Wensilon’s 3/8-inch by 3-inch concrete screw is listed for brick, block, and masonry.
Hillman suits buyers fastening fixtures to solid concrete with a large, torque-expanded wedge anchor. Its 3/4-inch diameter and concrete-only boundary are central fit considerations; it is not listed for brick or block bases.
Full product details
| Brand | Hillman |
|---|---|
| Color | Zinc |
| Compatible Groove Diameter | 0.75 inches |
| Included Components | Wedge Anchor |
| Item Dimensions | 6.1 x 4.3 x 2.9 inches |
| Item Weight | 7 pounds |
| Dimensions | 6.1 x 4.3 x 2.9 inches |
| Manufacturer | The Hillman Group |
| Material | Steel |
| Model | 371958 |
| Size | 3/4" x 5-1/2" |
| Size Name | 3/4" x 5-1/2" |
| Thread Size | 1/2" |
| Warranty Description | Warranty |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Hillman Zinc Steel Stud Wedge Anchors for Concrete, 3/4 x 5-1/2 in, 10 Pk
View on Amazon
#4 · Compact Stud Anchor
4. Hard-to-Find 1/4-Inch Stud Anchor
- Material: Steel
- Compatible Groove Diameter: 0.25 in
- Thread Size: 1/4"
- Size Name: 1/4 x 3
Best for: Compact zinc-finished anchor jobs.
Why it ranks #4: The explicitly named concrete stud anchor measures 1/4 inch by 3 inches and uses a same-diameter drill bit, suiting smaller fastening needs.
A 1/4-inch diameter paired with a 3-inch length gives this Hard-to-Find Fastener concrete stud anchor a narrow profile with added reach. The eight-piece set is made from steel with a zinc finish, and its specified 1/4-inch drill size helps coordinate hole preparation with the fastener.
The 1/4-inch diameter and matching 1/4-inch drill specification give buyers a clear sizing reference for preparing the installation hole. At 3 inches long, the anchor offers more length than a short fastener while keeping the listed diameter narrow. Its steel body has a zinc finish; the product description notes that the brand’s light zinc plating provides a more rust-resistant finish than bare steel. No specific exposure rating is supplied, so the finish should not be treated as a stainless or marine specification.
- 1/4-inch diameter and 3-inch length
- Specified 1/4-inch drill size
- Steel construction with zinc finish
- Eight-piece quantity
- The zinc-finished steel is not specified for marine or saltwater exposure.
Skip it if you need stainless anchors for saltwater exposure; Levanco’s 3/8-inch by 3-inch 304 stainless wedge anchors are specified for that environment.
This set suits buyers seeking narrow, 3-inch concrete stud anchors for a project with several fastening points. Match the specified 1/4-inch drill size, and account for the zinc-finished steel construction if the installation will face sustained moisture.
Full product details
| Brand | Hard-to-Find Fastener |
|---|---|
| Color | Zinc |
| Compatible Groove Diameter | 0.25 inches |
| Fastener Size | 1/4 x 3 |
| Head Style | Flat |
| Item Dimensions | 4.25 x 2.63 x 1 inches |
| Item Weight | 3.52 ounces |
| Dimensions | 4.25 x 2.63 x 1 inches |
| Manufacturer | Hard-to-Find Fastener |
| Material | Steel |
| Model | 014973237035 |
| Screw Head Style | Flat |
| Screw Point Style | Type 1 Point |
| Size Name | 1/4 x 3 |
| Thread Size | 1/4" |
| Thread Style | Fully Threaded |
Listed on Amazon as: Hard-to-Find Fastener 014973237035 Concrete Stud Anchors, 1/4 x 3, Piece-8
View on Amazon
#5 · Marine-Ready Material
5. Levanco 304 Stainless Wedge Anchor
- Material: Stainless Steel 304
- Compatible Groove Diameter: 3/8 in
- Thread Size: 3/8
- Size Name: 3/8" X 3"
Best for: Humid and marine environments.
Why it ranks #5: These 3/8-inch by 3-inch wedge anchors use 304 stainless steel and are identified for humid, marine, and saltwater environments.
304 stainless steel is the defining feature of Levanco’s 3/8-inch by 3-inch wedge anchor, enabling use in marine, saltwater, and other humid environments. The 10-piece set combines that corrosion-resistant material with a coarse standard thread for buyers seeking a stainless concrete fastening option.
The 304 (18-8) stainless construction is identified as highly corrosion resistant and as offering better corrosion resistance than zinc plating. That makes the material choice relevant for humid or saltwater exposure, rather than relying on a coating that can chip. Each anchor measures 3/8 inch in diameter and 3 inches long, with a coarse standard thread. Those dimensions help define the required installation and project fit; the product information does not list other compatible base materials.
- 304 (18-8) stainless steel construction
- Specified for marine, saltwater, and humid environments
- 3/8-inch diameter and 3-inch length
- 10 anchors per set
- The 10-piece set may be insufficient for projects requiring many fastening points.
Skip it if you need 30 smaller masonry screws; Wensilon’s 3/16-inch by 1-1/4-inch set supplies that quantity and size.
Pick Levanco for concrete fastening where stainless corrosion resistance matters, especially in humid or saltwater settings. Its 3/8-inch by 3-inch dimensions and 10-piece quantity define the fit; choose another fastener if your base material or required size differs.
Full product details
| Brand | Levanco |
|---|---|
| Color | Silver |
| Compatible Groove Diameter | 3/8 inches |
| Item Dimensions | 1 x 1 x 1 inches |
| Dimensions | 1 x 1 x 1 inches |
| Manufacturer | Levanco |
| Material | Stainless Steel 304 |
| Model | FT-23 |
| Screw Head Style | Wedge |
| Size | 3/8" X 3" |
| Size Name | 3/8" X 3" |
| Thread Size | 3/8 |
Listed on Amazon as: 3/8" X 3" Concrete Anchor, 304 Stainless Wedge Anchor with Excellent Anti-Rust Performance, 304(18-8) Stainless Steel Concrete Anchors and Screws Kit (10pcs)
View on Amazon
#6
6. YUEARN 304 Stainless Wedge Anchor
- Material: Stainless Steel
- Compatible Groove Diameter: 0.38 in
- Thread Size: 3/8
- Size Name: 3/8 in
Best for: Stainless wedge anchor projects.
Why it ranks #6: The 3/8-inch by 3-inch wedge anchor is made from 304 stainless steel, making it a corrosion-conscious option for buyers needing that material.
304 stainless steel gives the YUEARN 3/8-inch by 3-inch wedge anchor its defining material advantage for buyers prioritizing corrosion resistance. The pack contains eight anchors, each with a coarse standard thread, and the stated grade identifies the stainless construction rather than a stainless coating.
The product lists 304 stainless steel and identifies its manufacturer grade as Grade 304, allowing buyers to distinguish the material from coated steel alternatives. Each anchor is 3/8 inch in diameter and 3 inches long with a coarse, right-hand thread. Those specifications help determine whether the fastener matches the planned installation. The pack includes eight pieces, and the supplied usage information says to drill a hole in concrete, though it does not provide a specific drill-bit diameter in the listed details.
- Grade 304 stainless steel
- 3/8-inch diameter and 3-inch length
- Coarse, right-hand thread
- Eight anchors per pack
- The pack contains eight anchors, fewer than Levanco’s 10-piece 304 stainless set.
Skip it if you need more than eight stainless anchors; Levanco’s 3/8-inch by 3-inch 304 stainless wedge anchor comes in a 10-piece set.
Choose YUEARN for a 3/8-inch by 3-inch wedge anchor in Grade 304 stainless steel when eight pieces suit the job. Check the planned installation against the listed dimensions, since no drill-bit size is specified here.
Full product details
| Brand | YUEARN |
|---|---|
| Color | Sliver |
| Compatible Groove Diameter | 0.38 inches |
| Fastener Size | 3/8 |
| Head Style | Flat |
| Item Dimensions | 5.71 x 2.95 x 0.67 inches |
| Manufacturer | YUEARN |
| Manufacturer Grade | Grade 304 |
| Material | Stainless Steel |
| Model | 3/8 x 3 |
| Screw Head Style | Flat |
| Size Name | 3/8 in |
| Thread Size | 3/8 |
| Thread Style | Right Hand |
Listed on Amazon as: 3/8" x 3" Wedge Anchor, 304 Stainless Steel Concrete Anchors, 8Pcs
View on Amazon
#7
7. Ahniiqo Galvanized Wedge Anchor
- Compatible Groove Diameter: 0.31 in
- Thread Size: 5/16 x 2In
- Size Name: 5/16 x 2In
Best for: Small galvanized anchor projects.
Why it ranks #7: This 5/16-inch by 2-inch galvanized wedge anchor comes in a 12-piece pack and is listed for concrete floors and walls.
A 5/16-inch diameter and 2-inch length give the Ahniiqo wedge anchor a compact size for fastening into dense solid surfaces. Its galvanized construction adds rust and corrosion resistance, while the 12-piece quantity suits a project that needs several matching anchors rather than a single fastener.
The listed applications include concrete floors and walls, solid brick, and natural stone, so this anchor is intended for several high-density solid materials. Its 5/16-inch diameter also sets the specified drill-bit size: the supplied guidance calls for a carbide impact bit with the same diameter. That matching size helps keep hole preparation aligned with the anchor. Galvanized material provides rust and corrosion resistance, a useful feature for fasteners exposed to moisture, though no particular environment rating is listed.
- 12 anchors per package for multiple fastening points
- 5/16-inch diameter and 2-inch length
- Galvanized material resists rust and corrosion
- Listed for concrete, solid brick, and natural stone
- The 2-inch length may not suit projects requiring a longer anchor.
Skip it if you need a 3/8-inch by 3-inch anchor; Levanco’s 304 stainless wedge anchor offers that longer size and stainless construction.
Choose this Ahniiqo set for smaller fastening jobs in concrete, solid brick, or natural stone where a 5/16-inch by 2-inch wedge anchor fits. Its galvanized finish offers corrosion resistance, but the short length limits use where deeper anchoring is needed.
Full product details
| Brand | Ahniiqo |
|---|---|
| Color | Silver |
| Compatible Groove Diameter | 0.31 inches |
| Item Dimensions | 4 x 0.38 x 0.38 inches |
| Dimensions | 4 x 0.38 x 0.38 inches |
| Manufacturer | Ahniiqo |
| Size | 5/16 x 2In |
| Size Name | 5/16 x 2In |
| Thread Size | 5/16 x 2In |
Listed on Amazon as: 5/16 x 2 in Wedge Anchors 12 pcs Galvanized Concrete Anchors
View on Amazon
#8
8. Simpson Strong-Tie Titen HD
- Material: Carbon Steel
- Compatible Groove Diameter: 0.5 in
- Thread Size: 3/8-inch
- Size Name: 6 in
Best for: Heavy-duty cracked-concrete fastening.
Why it ranks #8: This 3/8-inch by 6-inch screw anchor is designed for cracked and uncracked concrete, but its screw-anchor format differs from a stud wedge anchor.
Compatibility with cracked and uncracked concrete sets the Simpson Strong-Tie Titen HD apart within this group. This 3/8-inch by 6-inch screw anchor also lists uncracked masonry applications, with a hex washer head and thread design that undercuts base material for efficient load transfer.
The Titen HD is listed for applications including sill plates, ledgers, and post bases, giving buyers examples of suitable structural fastening work. Its thread design undercuts the base material to support efficient load transfer, while the 3/8-inch diameter and 6-inch length define the fastener size. The hex washer head supplies the listed head style. Compatibility includes cracked and uncracked concrete and uncracked masonry, but the supplied information does not extend that masonry claim to cracked masonry.
- Listed for cracked and uncracked concrete
- Also listed for uncracked masonry
- Thread design undercuts base material for load transfer
- Hex washer head and 3/8-inch by 6-inch size
- The listed masonry compatibility is limited to uncracked masonry.
Skip it if you need stainless steel for saltwater exposure; Levanco’s 304 stainless 3/8-inch by 3-inch wedge anchors are specified for marine and humid conditions.
Choose the Titen HD for listed sill plate, ledger, or post-base work in cracked or uncracked concrete, or uncracked masonry. Its six-inch length and masonry condition boundary should match the installation plan.
Full product details
| Brand | Simpson Strong-Tie |
|---|---|
| Color | Zinc |
| Compatible Groove Diameter | 0.5 inches |
| Included Components | 3/8 X 6 Inch Titenhd 30 Box |
| Item Dimensions | 0.8 x 0.8 x 6.45 inches |
| Dimensions | 0.8 x 0.8 x 6.45 inches |
| Manufacturer | Simpson Strong-Tie |
| Material | Carbon Steel |
| Model | THD37600HR30 |
| Screw Head Style | Hex |
| Size | 6 inches |
| Size Name | 6 inches |
| Thread Size | 3/8-inch |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including wood dust which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Simpson Strong-Tie THD37600HR30 3/8 Inch x 6 Inch, Hex Washer Head, Zinc Plated Titen HD Heavy-Duty Screw Anchor for Concrete, Easy Installation (Pack of 30)
View on Amazon
#9
9. Wensilon Large Diameter Screw Anchor
- Material: Alloy Steel, Carbon Steel, Zinc
- Compatible Groove Diameter: 0.38 in
- Thread Size: 3/8 inch
- Size Name: 3/8" x 3"
Best for: Large-diameter masonry screw installs.
Why it ranks #9: The 3/8-inch by 3-inch concrete screw anchor has a stated actual thickness of 12 mm and includes a socket tool, but is not a stud wedge.
A listed actual thickness of 12 mm distinguishes Wensilon’s 3/8-inch by 3-inch concrete screw from a typical size-only description. The hardened carbon-steel anchor comes with a socket tool, and the installation directions specify opening the hole with a 3/8-inch hammer drill before installing the anchor.
This fastener is listed for anchoring to masonry, brick, or block, and its installation instructions give a specific workflow: drill with a 3/8-inch hammer drill, then install the wall anchor directly. The hardened carbon-steel body and 13-grade galvanized steel are the stated materials, while the included socket tool can support the described installation process. Each package contains 10 anchors. The 3/8-inch by 3-inch size and 12 mm actual thickness should be considered together when planning the fastening application.
- 3/8-inch by 3-inch listed size
- 12 mm actual thickness stated
- Socket tool included
- Listed for masonry, brick, and block
- The instructions specify a 3/8-inch hammer-drilled hole, so installation requires that drilling setup.
Skip it if you want a stainless wedge anchor for humid exposure; Levanco’s 304 stainless 3/8-inch by 3-inch model is specified for those conditions.
Choose this Wensilon set for masonry, brick, or block projects needing a larger-diameter screw anchor and the included socket tool. Its specified hammer-drill hole and 12 mm actual thickness are important planning details for installation.
Full product details
| Brand | Wensilon |
|---|---|
| Color | White |
| Compatible Groove Diameter | 0.38 inches |
| Fastener Size | 3/8 inch x 3 inch |
| Head Style | Flat, Socket |
| Manufacturer | Wensilon |
| Material | Alloy Steel, Carbon Steel, Zinc |
| Screw Head Style | Flat, Socket |
| Size Name | 3/8" x 3" |
| Thread Size | 3/8 inch |
| Thread Style | Right Hand, Fully Threaded, Coarse |
Listed on Amazon as: Wensilon 3/8" x 3" Zinc Plated Large Diameter Concrete Screw Actual Thickness 1/2"(12mm) for Anchoring to Masonry, Brick or Block (10 pcs)
View on Amazon
#10
10. Wensilon Hex Concrete Screw
- Material: Carbon Steel
- Compatible Groove Diameter: 0.19 in
- Thread Size: 0.2 in
- Size Name: 3/16" * 1-1/4"
Best for: High-volume masonry screw work.
Why it ranks #10: This 3/16-inch by 1-1/4-inch screw is listed for concrete, masonry, mortar, and other materials, but its small screw format is less suited to stud-anchor searches.
Thirty slotted-hex concrete screws give the Wensilon set a useful quantity advantage for projects with many masonry fastening points. Each screw measures 3/16 inch by 1-1/4 inches and has a diamond point, while hardened carbon steel and a blue rust finish are listed for hardness and corrosion resistance.
These are concrete screws rather than wedge anchors, and their listed applications include concrete, masonry, mortar walls, and similar home or workplace-yard jobs. The 3/16-inch by 1-1/4-inch size suits buyers whose fastening plan calls for a short, narrow screw; it does not provide the longer dimensions of larger anchors. Hardened carbon steel and the blue rust finish are described as supporting hardness and corrosion resistance, while the slotted hex head identifies the listed drive style.
- 30 screws per package
- Compact 3/16-inch by 1-1/4-inch size
- Hardened carbon steel construction
- Listed for concrete, masonry, and mortar walls
- The 1-1/4-inch length may not meet projects requiring a longer anchor.
Skip it if you need a 3-inch wedge anchor; YUEARN’s 3/8-inch by 3-inch 304 stainless model provides a substantially longer anchor format.
This Wensilon pack fits buyers needing many short concrete screws for masonry, mortar walls, or concrete. Its screw format, 3/16-inch diameter, and 1-1/4-inch length are key fit limits for jobs planned around longer wedge anchors.
Full product details
| Brand | Wensilon |
|---|---|
| Color | Blue |
| Compatible Groove Diameter | 0.19 inches |
| Fastener Size | 3/16" * 1-1/4" |
| Head Style | Hex |
| Manufacturer | Wensilon |
| Material | Carbon Steel |
| Point Style | Diamond Point |
| Screw Head Style | Hex |
| Screw Point Style | Diamond Point |
| Size Name | 3/16" * 1-1/4" |
| Thread Size | 0.2 inches |
Listed on Amazon as: Wensilon(30 PCS) 3/16" 1-1/4" Slotted Hex Concrete Screws Anchor Blue Hexagon Head for Anchoring to Masonry, Block or Brick Stucco
View on AmazonAvoid the wrong base material and anchor type
A wedge anchor is not a universal masonry fastener: the product notes distinguish solid concrete from brick and block, and using the wrong base material can leave the anchor without its intended grip. CONFAST specifies use in concrete only, not brick, block, or grout; Hillman likewise says its wedge anchor should not be used in block or brick. By contrast, the Wensilon screw anchors list masonry, brick, or block applications, so they may fit a different base-material need, though they are not wedge-style stud anchors.
Do not treat these product categories as interchangeable simply because each is called a concrete anchor. Confirm the base material and the fastener’s stated application before choosing.
If the project involves cracked concrete or a structural connection, consult the applicable installation instructions and load data rather than inferring suitability from diameter or product name alone.
Match the drill hole to the anchor, not the fixture
A hole that is too small or too large can prevent a wedge anchor from seating and expanding as intended. The product guidance for CONFAST says to use a bit with the same diameter as the anchor, and its installation information calls for drilling at least 1/2 inch deeper than the wedge-anchor embedment. Ahniiqo likewise says to use a 5/16-inch drill for its 5/16-inch anchor.
These directions make the anchor diameter—not the fixture-hole size—the key starting point for bit selection. A separate trap is confusing overall length with embedment: the listed 5-1/2-inch CONFAST and Hillman anchors do not establish how much length will remain available after passing through a fixture.
Check the required embedment, fixture thickness, and installation instructions for the exact anchor before drilling; the supplied product data does not provide load ratings or a universal embedment depth.
How to Choose a Concrete Stud Anchor
Anchor format and base material
Choose the anchor format based on the material you are fastening into and the installation the project requires. The CONFAST and Hillman products are wedge anchors specified for solid concrete only, while both Hard-to-Find products are labeled concrete stud anchors. Wensilon’s 3/16-inch hex screw is listed for concrete, masonry, mortar walls, and related uses; its 3/8-inch screw is listed for masonry, brick, or block.
The Simpson Strong-Tie Titen HD is a screw anchor specified for cracked and uncracked concrete and uncracked masonry. A buyer fastening a fixture to solid concrete can focus on the wedge or stud options; someone working with brick or block should not assume the concrete-only wedges are appropriate.
Diameter, length, and fixture fit
Match both anchor diameter and length to the installation, including the fixture thickness and required embedment. The range here runs from Wensilon’s 3/16-inch by 1-1/4-inch screw and Hard-to-Find’s 1/4-inch by 3-inch stud anchor to Hillman’s 3/4-inch by 5-1/2-inch wedge. Other options include 3/8-inch by 3-inch stainless wedges and CONFAST’s 1/2-inch by 5-1/2-inch anchor.
Smaller sizes suit projects whose specifications call for a smaller fastener; the larger diameters are options when the design calls for them, not automatic upgrades. Length alone does not reveal usable embedment.
Check the fixture and anchor instructions, and do not select a size based only on the dimensions of the exposed fixture hole.
Material and exposure conditions
Choose material according to the moisture and corrosion exposure at the installation site. Levanco and YUEARN list 304 stainless-steel wedge anchors, with Levanco specifically identifying marine, saltwater, and humid environments. Ahniiqo lists galvanized construction and describes it as rust-resistant, while CONFAST’s zinc-plated carbon-steel anchor is specified for dry environments.
The Hillman anchor is zinc steel, and the Hard-to-Find stud anchors are steel with a zinc finish. For damp or coastal conditions, the listed 304 stainless options have the clearest exposure-specific claims; for a dry, solid-concrete project, the zinc-plated CONFAST may suit.
Verify the material and installation requirements for the actual site rather than treating every metal finish as equally corrosion-resistant.
Which Concrete Stud Anchor Should You Choose?
For a general solid-concrete project that calls for a wedge anchor, choose CONFAST Wedge Anchor: it measures 1/2 inch by 5-1/2 inches and includes nuts and washers. If your plans specify a 1/2-inch stud anchor with a shorter 3-3/4-inch length, consider Hard-to-Find 1/2-Inch Stud Anchor; for a smaller specified stud, choose Hard-to-Find 1/4-Inch Stud Anchor. Buyers who need a 3/4-inch wedge can look at Hillman Zinc Steel Wedge Anchor, while damp or marine exposure points toward Levanco 304 Stainless Wedge Anchor or YUEARN 304 Stainless Wedge Anchor.
If the job calls for a screw anchor rather than a stud or wedge, consider Simpson Strong-Tie Titen HD. Confirm the base material, load data, embedment, and installation instructions before purchasing.
Frequently Asked Questions
How deep should I drill a hole for a concrete wedge anchor?
Use the embedment required for your specific anchor and fixture, then follow the anchor’s installation instructions for drilling depth. There is no single depth that fits every anchor or application. Match the drill bit to the anchor diameter, and verify the required embedment and load rating before drilling.
Can wedge anchors be installed in brick or concrete block?
Do not assume a wedge anchor is suitable for brick or concrete block. The recommended CONFAST wedge anchor is intended for solid concrete, and base material affects anchor performance. Check the anchor’s installation instructions and load information for your actual material; choose an anchor specifically suited to masonry or block when required.
How do I choose anchor diameter and embedment for a fixture?
Start with the fixture plans and the anchor’s load data: select a diameter and embedment that meet the specified requirements for the actual base material and load. Do not choose by appearance alone. Confirm the drill-bit size, installation instructions, and required embedment for the particular anchor before purchasing or installing it.
Which anchors are suitable for damp or marine exposure?
For damp or marine exposure, consider the listed 304 stainless steel wedge anchors from Levanco or YUEARN. The CONFAST zinc-plated carbon-steel wedge anchor is specified for dry environments, so it is not the best choice for wet or marine conditions. Check each product’s instructions for suitability in your exposure conditions.
When should I choose a screw anchor instead of a wedge anchor?
Choose a screw anchor when your plans call for a screw-type anchor rather than a stud or wedge. The listed Simpson Strong-Tie Titen HD is a screw anchor for concrete. Confirm that the anchor matches the base material, load data, embedment, and installation instructions for the job.
Final Words
For a general solid-concrete job calling for a wedge anchor, the CONFAST 1/2-inch by 5-1/2-inch option is the overall fit identified here; it includes a nut and washer and is supplied in a box of Its zinc-plated carbon steel is specified for dry environments. Consider stainless steel for damp or marine exposure, or a screw anchor when plans require one.
Before buying, verify material, load rating, embedment, and installation requirements.
